Product Code:
192472 Weight:0KgCategories: Xhorse Key Programmer
Manufacturer | Xhorse VVDI |
Language | Multi-language |
Warranty | 1 year |
Update | Free Update Online |
Version | Full Version |
Weight | 0 Kg |
Note:
1. Don't use the Enternet cable and USB cable at the same time. For key programming,use usb cable,coding use Enternet cable.
2. When connect VVDIBIM device with PC, it will display"Booting" on little screen, after 20 secs it will display as "BMW", then it is connected OK.
3. VVDI BIMTool Pro and VVDI BMW Tool use same software, and some functions in the software will prompt you to use bimtool.
VVDI BIM Tool Pro Functions:
Detail Functions of VVDI BIMTool
1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code
2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whold database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key inforamtion
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file
5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key
6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key
7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information
8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
9. Read E-Series/F-Series ECU ISN via OBDII
1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version
13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG
VVDI BIMTOOL Pro Software Display:
VVDI BIM Tool Pro can read ISN for following ECUs/DMEs
Xhorse VVDI BIM PRO vs. VVDI BMW vs. VVDI2 BMW:
VVDI BIM PRO | VVDI BMW | VVDI2 BMW | |
Color | Blue | Blue | Yellow |
Functions | Locksmith, programming, coding | Locksmith, programming, coding | Locksmith |
Update | Software Online for free Firmware use "update kit" update for free | Software Online for free Firmware use "update kit" update for free | Software Online for free Firmware use "update kit" update for free |
Support System | EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM/ BDC system | EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM / BDC system | EWS to CAS (1, 2, 3, 3++ 4, 4+) |
Programming Funtion | Support Can and DOIP | Support Can | / |
Item | VVDI BIMTOOL Pro | VVDI BMW TOOL |
IMG | ![]() | ![]() |
Remark | In stock | Out of stock |
Language | Chinese, English, Italian, Spanish, German, Hungarian, Polish | Chinese, English, Italian, Spanish, German, Hungarian, Polish |
Program E/F chassis | Yes | Yes |
Code E/F chassis | Yes | Yes |
Learn OBD key | Yes for CAS1 / CAS2 / CAS3 / CAS3+ / CAS3+ ISTAP / CAS4 / CAS4+ | Yes for CAS1 CAS2 CAS3 CAS3+ CAS3+ISTAP CAS4 CAS4+ |
File make key | Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc. | Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc. |
Gnerate key for FEM/BDC system | Yes | Yes |
Correct mileage | Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM / BDC system | Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM/BDC system |
Read EEPROM & synchronous code data | Yes for CAS1 CAS2 CAS3 CAS3+ | Yes For CAS1 CAS2 CAS3 CAS3+ |
Get ECU ISN | Yes | Yes |
Support synchronous ECU and CAS, synchronous ELV and CAS | Yes | Yes |
Reset 8HP gearbox in F chassis | Yes | Yes |
Exchange ECU and CAS | Yes | Yes |
Add ethernet port | Yes, support 10/100M programming via Ethernet | No |
WiFi | Yes, support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade | No |
DoIP Vehicle/Module Programming | Yes | No |
BMW ECU programming (NBT/CIC) | Yes, connect via network cable | No |
Speed up the F/G Chassis programming | Yes, connect via network cable | No |
BMW E-sys and Rheingold Diagnostic System | Yes, able to replace the specialized devices (connect via network cable) | No |
Read N13/N20/N55/N63 ISN data without disassembling | Yes |
2021-06-08 Require firmware V1.6.6
BMW V1.7.5
1. Bugfix for BOSH ECU adapter.
2. Support unlock FEM/BDC directly for ISTA V4.28.41 verison
3. Support reset EKPS producte mode
4. Support OBD delete key for CAS1 CAS2 CAS3 CAS3+
5. Suport OBD command open car door for CAS4, FEM, BDC (F/G series program and coding->Special function->Execute command)
6. Bugfix
LONGHUA DISTRICT SHENZHEN CHINA(PC.518109)
It is recommended that visitors in the United States and Canada visit the site deployed in North America, do you jump?